Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

7945/7965G Upgraded firmware and only part of the screen works rest is black/white.

I did a firmware reset and when the phones came up they would not connect to the tftp server on the network. 

I setup a lab tftp and hooked the phones to a switch and reloaded a firmware, when the phones came up only a part of the screen was working.  One phone it was white with only a little part on the left side working.  The other phone it was black with only a little sliver on the left working.  Loaded the lastest the firmware and this fixed the issue. 

firmware loads I went through were

Screen wasn't working:cmterm-7945_7965-sccp.9-3-1-1.zip

Worked: cmterm-7945_7965-sccp.9-3-1SR2-1.zip

This is more of an FYI as I looked to find this issue and could find it anywhere.  So I hope this helps someone in the future. 

241
Views
0
Helpful
0
Replies