Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7960g/7912g on a 3550 pwr

planning to buy phones for my lab

i already have the 3550-24 pwr switch and i know this is not 802.3af compliant.

do 7960g and 7912g work on this switch?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: 7960g/7912g on a 3550 pwr

Hi Celso,

Hope all is well my friend! Yes, both of these models (7960G and 7912G) will work with Cisco Pre-Standard PoE :)

Q. What IP phone models support the Cisco pre-standard method of powered device detection?

A. These Cisco IP phones can accept Cisco pre-standard PoE from a card integrated with a Cisco Catalyst switch or a Catalyst in-line power patch panel:

7985G

7960G

7940G

7910G

7910G + SW

7912G

7905G

7902G

These phones can draw local power from a power cube (CP-PWR-CUBE-2=) in addition to a country or regionally specific power cord (CP-PWR-CORD-xx=).

Q. What IP phone models support the IEEE standard method of powered device detection?

A. These Cisco IP phones support IEEE 802.3af PoE:

7961G-GE

7971G-GE

7941G

7931G

7911G

7941G-GE

Note: These Cisco IP phones support both the Cisco pre-standard PoE and IEEE 802.3af PoE:

7970G

7961G

7906G

From this new doc;

Power over Ethernet (PoE) Power Requirements FAQ

http://www.cisco.com/en/US/products/hw/phones/ps379/products_qanda_item09186a00808996f3.shtml

Hope this helps and best of luck!

Rob

2 REPLIES
Hall of Fame Super Red

Re: 7960g/7912g on a 3550 pwr

Hi Celso,

Hope all is well my friend! Yes, both of these models (7960G and 7912G) will work with Cisco Pre-Standard PoE :)

Q. What IP phone models support the Cisco pre-standard method of powered device detection?

A. These Cisco IP phones can accept Cisco pre-standard PoE from a card integrated with a Cisco Catalyst switch or a Catalyst in-line power patch panel:

7985G

7960G

7940G

7910G

7910G + SW

7912G

7905G

7902G

These phones can draw local power from a power cube (CP-PWR-CUBE-2=) in addition to a country or regionally specific power cord (CP-PWR-CORD-xx=).

Q. What IP phone models support the IEEE standard method of powered device detection?

A. These Cisco IP phones support IEEE 802.3af PoE:

7961G-GE

7971G-GE

7941G

7931G

7911G

7941G-GE

Note: These Cisco IP phones support both the Cisco pre-standard PoE and IEEE 802.3af PoE:

7970G

7961G

7906G

From this new doc;

Power over Ethernet (PoE) Power Requirements FAQ

http://www.cisco.com/en/US/products/hw/phones/ps379/products_qanda_item09186a00808996f3.shtml

Hope this helps and best of luck!

Rob

New Member

Re: 7960g/7912g on a 3550 pwr

Thanks a lot Rob...

213
Views
0
Helpful
2
Replies
CreatePlease login to create content