Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7960G not Powering Up on 2811

Currently have running a new 2811 with CME. It has a NME-16es-1g-p card in it and runs great with my 7911G and 7941G phones. I am currently trying to evaluate a rugged 7960G on it but it will not power on. I know that the 7940G uses Cisco prestandard PoE but from all the research online, it looks like this card should handle both 802.3af and cisco prestandard PoE.

6 REPLIES

Re: 7960G not Powering Up on 2811

If you do a sh power inline, are the ports enable d to have POE?

Good guide:

http://www.cisco.com/en/US/products/hw/modules/ps2797/products_feature_guide09186a0080415bae.html#wp1787811

I did find this bit of info.

NME-16ES-1G-P-Standard single-wide Cisco EtherSwitch service module with 16 10/100-Mbps ports with Power over Ethernet (PoE), and 1 10/100/1000 Gigabit Ethernet port.

Note The 10/100/1000 Gigabit Ethernet port on the 16-port Cisco EtherSwitch service module does not support PoE.

New Member

Re: 7960G not Powering Up on 2811

Power is on and enabled. I do know that the gig port does not have POE.

New Member

Re: 7960G not Powering Up on 2811

Im having exactly the SAME issue with 'NME-XD-24ES-1S-P' and 'NME-XD-48ES-2S-P' on C3825. All phones that use Cisco prestandard (7940 and 7960) dont get power.

Phones that use IEEE 802.3af POE work fine.

Have you discovered what the problem is?

thanks a lot,

Met

New Member

Re: 7960G not Powering Up on 2811

Not yet. I am waiting for my contract # so I can get ahold of TAC.

New Member

Re: 7960G not Powering Up on 2811

CSCsi70300 Bug Details

NME Etherswitch Service Module Not Detecting Pre-Standard Devices

Symptom:

Pre-Standard POE devices are not powering up, link is down/down.

Conditions:

PreStd POE device must be connected to Etherswitch Service Module (ex. NME-16ES-1G-P) running 12.2(35)SE2.

Workaround:

Downgrade IOS to 12.2(25)SEE3

Further Problem Description:

Althought the NME runs 3750 IOS, the problem is not seen on a 3750 switch.

The IEEE 802.3af devices function fine (ex. 7961, 7941), only Pre-Std are affected

New Member

Re: 7960G not Powering Up on 2811

Thanks for the info. Any idea if 12.2(25)SEE3 supports 802.3af as well?

324
Views
0
Helpful
6
Replies
CreatePlease login to create content