Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7961g SEPmacaddress.cnf.xml file

Hi,

I'm having trouble getting a 7961g with SIP firmware to register with my SIP Proxy.   I've used wireshark to see whats going on at a packet level and the phone sends its DHCP requests and gets an ack fine.   It then requests a file via TFTP CTLSEP001BD40BA758.tlv which isnt there, then requests this file: SEP001BD40BA758.cnf.xml, after that there is nothing and as there are no SIP packets coming from it I would asume its a problem with this file.   Can anyone see if there is anything wrong with it?

Thanks

File Below:

<device>
   <deviceProtocol>SIP</deviceProtocol>
   <sshUserId>cisco</sshUserId>
   <sshPassword>cisco</sshPassword>
   <devicePool>
      <dateTimeSetting>
         <dateTemplate>M/D/Ya</dateTemplate>
         <timeZone>Eastern Standard/Daylight Time</timeZone>
         <ntps>
              <ntp>
                  <name>192.168.1.2</name>
                  <ntpMode>Unicast</ntpMode>
              </ntp>
         </ntps>
      </dateTimeSetting>
      <callManagerGroup>
         <members>
            <member priority="0">
               <callManager>
                  <ports>
                     <ethernetPhonePort>2000</ethernetPhonePort>
                     <sipPort>5060</sipPort>
                     <securedSipPort>5061</securedSipPort>
                  </ports>
                  <processNodeName>192.168.1.2</processNodeName>
               </callManager>
            </member>
         </members>
      </callManagerGroup>
   </devicePool>
   <sipProfile>
      <sipProxies>
         <backupProxy></backupProxy>
         <backupProxyPort></backupProxyPort>
         <emergencyProxy></emergencyProxy>
         <emergencyProxyPort></emergencyProxyPort>
         <outboundProxy></outboundProxy>
         <outboundProxyPort></outboundProxyPort>
         <registerWithProxy>true</registerWithProxy>
      </sipProxies>
      <sipCallFeatures>
         <cnfJoinEnabled>true</cnfJoinEnabled>
         <callForwardURI>x--serviceuri-cfwdall</callForwardURI>
         <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
         <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
         <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
         <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
         <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
         <rfc2543Hold>false</rfc2543Hold>
         <callHoldRingback>2</callHoldRingback>
         <localCfwdEnable>true</localCfwdEnable>
         <semiAttendedTransfer>true</semiAttendedTransfer>
         <anonymousCallBlock>2</anonymousCallBlock>
         <callerIdBlocking>2</callerIdBlocking>
         <dndControl>1</dndControl>
         <remoteCcEnable>true</remoteCcEnable>
      </sipCallFeatures>
      <sipStack>
         <sipInviteRetx>6</sipInviteRetx>
         <sipRetx>10</sipRetx>
         <timerInviteExpires>180</timerInviteExpires>
         <timerRegisterExpires>3600</timerRegisterExpires>
         <timerRegisterDelta>5</timerRegisterDelta>
         <timerKeepAliveExpires>120</timerKeepAliveExpires>
         <timerSubscribeExpires>120</timerSubscribeExpires>
         <timerSubscribeDelta>5</timerSubscribeDelta>
         <timerT1>500</timerT1>
         <timerT2>4000</timerT2>
         <maxRedirects>70</maxRedirects>
         <remotePartyID>true</remotePartyID>
         <userInfo>None</userInfo>
      </sipStack>
      <autoAnswerTimer>1</autoAnswerTimer>
      <autoAnswerAltBehavior>false</autoAnswerAltBehavior>
      <autoAnswerOverride>true</autoAnswerOverride>
      <transferOnhookEnabled>false</transferOnhookEnabled>
      <enableVad>false</enableVad>
      <preferredCodec>g711ulaw</preferredCodec>
      <dtmfAvtPayload>101</dtmfAvtPayload>
      <dtmfDbLevel>3</dtmfDbLevel>
      <dtmfOutofBand>avt</dtmfOutofBand>
      <alwaysUsePrimeLine>false</alwaysUsePrimeLine>
      <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
      <kpml>3</kpml>
      <natEnabled>0</natEnabled>
      <natAddress></natAddress>
      <phoneLabel>LinkExperts</phoneLabel>
      <stutterMsgWaiting>1</stutterMsgWaiting>
      <callStats>true</callStats>
      <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
      <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
      <startMediaPort>16384</startMediaPort>
      <stopMediaPort>32766</stopMediaPort>
      <sipLines>
         <line button="1">
            <featureID>9</featureID>
            <featureLabel>100</featureLabel>
            <proxy>192.168.1.2</proxy>
            <port>5060</port>
            <name>1202</name>
            <displayName>Test</displayName>
            <autoAnswer>
               <autoAnswerEnabled>2</autoAnswerEnabled>
            </autoAnswer>
            <callWaiting>3</callWaiting>
            <authName>testphone</authName>
            <authPassword>test</authPassword>
            <sharedLine>false</sharedLine>
            <messageWaitingLampPolicy>1</messageWaitingLampPolicy>
            <messagesNumber>*97</messagesNumber>
            <ringSettingIdle>4</ringSettingIdle>
            <ringSettingActive>5</ringSettingActive>
            <contact>100</contact>
            <forwardCallInfoDisplay>
               <callerName>true</callerName>
               <callerNumber>true</callerNumber>
               <redirectedNumber>false</redirectedNumber>
               <dialedNumber>true</dialedNumber>
            </forwardCallInfoDisplay>
         </line>
      </sipLines>
      <voipControlPort>5060</voipControlPort>
      <dscpForAudio>184</dscpForAudio>
      <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
      <dialTemplate>dialplan.xml</dialTemplate>
   </sipProfile>
   <commonProfile>
      <phonePassword></phonePassword>
      <backgroundImageAccess>true</backgroundImageAccess>
      <callLogBlfEnabled>1</callLogBlfEnabled>
   </commonProfile>
   <loadInformation>SIP41.8-5-2S</loadInformation>
   <vendorConfig>
      <disableSpeaker>false</disableSpeaker>
      <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
      <pcPort>1</pcPort>
      <settingsAccess>1</settingsAccess>
      <garp>0</garp>
      <voiceVlanAccess>0</voiceVlanAccess>
      <videoCapability>0</videoCapability>
      <autoSelectLineEnable>0</autoSelectLineEnable>
      <webAccess>1</webAccess>
      <spanToPCPort>1</spanToPCPort>
      <loggingDisplay>1</loggingDisplay>
      <loadServer></loadServer>
   </vendorConfig>
   <versionStamp>1143565489-a3cbf294-7526-4c29-8791-c4fce4ce4c37</versionStamp>
   <networkLocale>US</networkLocale>
   <networkLocaleInfo>
      <name>US</name>
      <version>5.0(2)</version>
   </networkLocaleInfo>
   <deviceSecurityMode>1</deviceSecurityMode>
   <authenticationURL></authenticationURL>
   <directoryURL></directoryURL>
   <idleURL></idleURL>
   <informationURL></informationURL>
   <messagesURL></messagesURL>
   <proxyServerURL>proxy:3128</proxyServerURL>
   <servicesURL></servicesURL>
   <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
   <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
   <dscpForCm2Dvce>96</dscpForCm2Dvce>
   <transportLayerProtocol>4</transportLayerProtocol>
   <capfAuthMode>0</capfAuthMode>
   <capfList>
      <capf>
         <phonePort>3804</phonePort>
      </capf>
   </capfList>
   <certHash></certHash>
   <encrConfig>false</encrConfig>
</device>

Everyone's tags (4)
1673
Views
0
Helpful
0
Replies