Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7962G Boot issue

Hello,

     I have a 7962G that doesn't want to boot.  It powers on, then just sits there with nothing on the screen.  I have many other phones working.  I did the factory reset and then tried a hard reset.  Later I did the boot with the handset off and still nothing.  Any ideas on how to force an image onto this device?

1 ACCEPTED SOLUTION

Accepted Solutions
Blue

7962G Boot issue

Hi,

I believe it if trying to upgrade firmware from tftp server and is failing.

Tyr to upgrade the firmware locally via third party tftp server. Or may be raising TAC case for RMA.

Regards

Ronak Patel

Rate helpful posts by clicking star below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
2 REPLIES
Blue

7962G Boot issue

Hi,

I believe it if trying to upgrade firmware from tftp server and is failing.

Tyr to upgrade the firmware locally via third party tftp server. Or may be raising TAC case for RMA.

Regards

Ronak Patel

Rate helpful posts by clicking star below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
New Member

7962G Boot issue

Thanks for your help.  After setting up a tftp server on my local machine I found that it was calling the wrong firmware.  My server had 9.x on it while the phone wanted 8.x.  So I'm all set now.

268
Views
0
Helpful
2
Replies
CreatePlease login to create content