I have a callmanager 188.8.131.520-3 cluster with a numerous 7962G phones.We added some "new" ones recently and we noticed that the time was 2hrs out.On further investigation when web browsed to the phones the Time Zone entry was blank.
I compared the working phones with the new phones and the only difference from the phone web was that the working ones has "hardware revision 6.0" and the non working ones are "hardware revision 1.0".I know that this is probably a firmware bug on the phones but for the life of me i can't seem to find any bugs that relate to this.The code on all phones is 8.3(3)SR2S.
Anyone seen this before and know of the bug either in the firmware or in callmanager.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...