Can someone shed light on where in UCM the setting is so an ip phone (7965) can have "vpn" enabled on the phone?
UCM Version is 18.104.22.16800-9.
7965 Firmware version is SCCP42.9-3-1SR2-1S
I did not setup our environment to work with VPN and have very little insight. But I have a 7962 that has no issues connecting to VPN from Internet and register to UCM. I added a 7965, essentially "mirrored" the Phone Setup of 7962 (including the Common Phone Profile that is used for VPN phones). However while I can register 7965 if i'm on corporate LAN, when I try to connect direct via internet it won't register and I see via phone security settings the VPN is "disabled". If I plug the 7962 in over the internet, it asks for user/pass and upon insertion it is connected over VPN.
What is preventing the new 7965 from having VPN "enabled"?
If, in the VPN profile, you have "Enable Auto Network Detect", try de-selecting this. This should allow you to manually select VPN.
My limited experience shows that the auto detect feature is quite crude. If the phone thinks it can ping the IP address of the server, it will not kick in the VPN login, and instead, just sit trying to register.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...