Hi, sorry had a quick search but couldn't find answer.
Trying to find out what the power draw is for the 7971G when backlight is off, unfortunately CDP says the same when on or off;
core-switch#sh cdp ne de --------------------------------------------- Device-ID: SEP002155Dxxyyz Advertisement version: 2 Platform: Cisco IP Phone 7971 Capabilities: Host Phone TwoPortRelay Interface: gi2, Port ID (outgoing port): Port 1 Holdtime: 154 Version: SIP70.8-5-4S Duplex: full Power drawn: 15050 milliwatts SysObjectID: 0.0 Addresses: IP 172.16.32.199 core-switch#
its running on an external power supply, and looking to buy a cisco sg300-10P (or MP) switch for my little office at home, and conscious of carbon emissions of leaving it on overnight.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...