7975G when in SIP mode, rebooting every 2 minutes.
We're testing a 7975G with the SIP software, using a non-Cisco SIP server (Asterisk).
Running version SIP75.9-2-3S using TCP as the connection transport.
If there is no activity on the phone (incoming/outgoing call for example) the phone will loose the registrations of the SIP accounts it is currently logged in to, go to "restarting" and so what can only be described as a soft reboot and come back a few seconds later.
If you use the phone in this time, it prolongs this activity but still happens around 2 minutes if you're inactive after that.
Here are some logs from the phone web page:
12:53:53p No Trust List Installed
12:56:18p No Trust List Installed
<< between these entries, we made a call and then had an incoming call >>
1:07:13p No Trust List Installed
1:09:38p No Trust List Installed
1:11:53p No Trust List Installed
In addition, sometimes in a call, the error "UCM down, features disable" will show but the call will remain active. After hanging up, the soft-restart process appears to occur again.
On both instances, after the soft-reboot, the phone logs back in and the process continues.
As we're using a non-Cisco server, support from them is limited and after trying everything possible, we've come to a point where we don't have any further ideas.
All I can think is that "something" is timing out after 2 minutes but there isn't anything set on the SIP server (we've tried 2, different software) and any config lines that were set to 120 seconds in the cnf.xml were changed to various values without any change.
Any help, guidance or solutions would be appreciated.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4