This "Shared Line" approach to multiple devices is fully supported. When configuring the Directory Number for the new Device just make it exactly the same as the existing phone. When you do this a new note pops up in RED indicating Shared Line. Some settings like Forward no Answer and Forward Busy settings will propogate from Device A to Device B when this is done.
We have mulitple devices with the same number, like many of our equipment rooms share DN XXXX so when you are looking for your co-worker just dial XXXX in the call rings in all rooms :)
Ok, so that works pretty good. I can dial from the pstn and ring both phones, I can 4 digit dial from both phones internally. From my 7980 I can dial 9 and get out but from the softphone I can't dial 9 and get out. Tells me call cannot be completed as dialed.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4