Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7985 isuue

my 7985 iphone can not dial the pstn.but

others is no problem.CCS and partion is ok! there is my debug:

26 03:23:39.830: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0122

Bearer Capability i = 0x8890

Standard = CCITT

Transfer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA1839E

Preferred, Channel 30

Calling Party Number i = 0x0181, '20050'

Plan:ISDN, Type:Unknown

Called Party Number i = 0x80, '7037531'

Plan:Unknown, Type:Unknown

*Mar 26 03:23:40.114: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x8122

Channel ID i = 0xA9839E

Exclusive, Channel 30

*Mar 26 03:23:41.274: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x8122

Cause i = 0x84B7 - Unknown cause value

*Mar 26 03:23:41.278: ISDN Se0/0/0:15 Q931: TX -> RELEASE pd = 8 callref = 0x0122

Cause i = 0x80E4 - Invalid information element contents

*Mar 26 03:23:41.346: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x8122

2 REPLIES
Green

Re: 7985 isuue

What if you change the bearer-cap under voice-port

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K33752986

Re: 7985 isuue

7985 sets are going to try to setup a video call by default. Therefore, under the voice-port config in your gateway, you should put the statement "bearer-cap Speech". This should resolve your issue.

If you found this helpful kindly remember to rate this post.

Thanks

145
Views
0
Helpful
2
Replies