02-26-2008 05:44 PM - edited 03-15-2019 09:05 AM
Hello,
I need the part number of 8-port BRI network module that can be used for voice. The NM will be connected to a 2851 router.
Thank you,
Ricky
02-26-2008 11:02 PM
Hi Ricky,
unfortunately there are only 8-port data BRI network modules available.
i think you have to insert 4x VIC-2BRI-NT/TE to reach your 8-port voice BRI in the 2800 series.
http://www.cisco.com/warp/public/788/products/2isdn_bri_vic.html
we had the same problem in several remote offices...
cheers, oliver
02-26-2008 11:06 PM
Thank you very much.
02-27-2008 02:07 AM
Hi,
the other alternative is that you use 1 x EVM-HD-8FXS/DID with 2 x EM-4BRI-NT/TE.
This will give you in additional 8 FXS port that you may or not want, but it is all contained into a single NM slot:
Hope this helps, please rate post if it does!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide