Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

8961 call features don't work on CME 10.0

Hi all,

 

I installed the 8961 using sip on CME 10.0, and I have configured the feature-buttons on the template which includes call pickup.

these feature buttons can display on the screen. But when I use these buttons, I get the busy tone, that means these feature buttons don't work.

Otherwise all configuration under voice register template X - will not be displayed on the phone.

 

Are there any other setting steps for using these call features?

Also if I press cfwd all softkey after pressing the first digit I will get an busy tone. Anybody has an hint to solve the issue ?

 

 

Thanks

 

Stefan

Everyone's tags (3)
2 REPLIES
New Member

sh run output: 2911Fabi#sh

sh run output:

 

2911Fabi#sh run
Building configuration...


Current configuration : 4594 bytes
!
! Last configuration change at 11:24:07 UTC Mon Jun 30 2014 by cisco
version 15.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 2911Fabi
!
boot-start-marker
boot system flash c2900-universalk9-mz.SPA.153-3.M3.bin
boot-end-marker
!
aqm-register-fnf
!
enable secret 5 $1$y/9B$dyQFexGqpq3RQucFhEG2p.
enable password cisco
!
no aaa new-model
!
no ip routing
!
!
!
!
!
!
no ip cef
no ipv6 cef
multilink bundle-name authenticated
!
!
!
!
!
!
!
voice-card 0
!
!
voice rtp send-recv
!
voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 fax protocol pass-through g711alaw
 modem passthrough nse codec g711alaw
 sip
  bind control source-interface GigabitEthernet0/0
  bind media source-interface GigabitEthernet0/0
  registrar server expires max 120 min 60
!
voice class codec 1
 codec preference 1 g711alaw
 codec preference 2 g711ulaw
 codec preference 3 g729br8
 codec preference 4 g729r8
!
voice class custom-cptone leavetone
 dualtone conference
  frequency 500 2500
  cadence 300 400 500
!
voice class custom-cptone jointone
 dualtone conference
  frequency 500 1200
  cadence 300 200 400
!
!
voice register global
 mode  cme
 source-address 10.137.240.127 port 5060
 privacy-on-hold
 max-dn 200
 max-pool 42
 call-forward system redirecting-expanded
 call-feature-uri cfwdall http://10.137.240.127/cfwdall
 phone-redirect-limit 20
 tftp-path flash:
 create profile sync 0185744153262714
 overlap-signal
!
voice register dn  1
 number 100
 pickup-group 1
 name Michal Mandak
 huntstop
 label Michal Mandak
!
voice register dn  2
 number 6022
 pickup-group 1
 name Stefan 6022
 huntstop
 label STefan 6022
!
voice register dn  3
 number 161
 pickup-group 1
 name Jan Jilma
 label Jan Jilma
!
voice register template  1
 dialplan 1
 softkeys idle  Newcall Redial Cfwdall Pickup
!
voice register dialplan 1
!
voice register pool  1
 busy-trigger-per-button 1
 id mac 5478.1AE0.E122
 feature-button 1 PickUp
 type 8961
 number 1 dn 1
 template 1
!
voice register pool  2
 busy-trigger-per-button 2
 id mac 203A.0783.A2A9
 type 8945
 number 1 dn 3
!
!
!
!
!
license udi pid CISCO2911/K9 sn FCZ16446090
hw-module pvdm 0/0
!
hw-module pvdm 0/1
!
!
!
username admin privilege 15 password 0 cisco
username c privilege 15 password 0 c
username cisco privilege 15 password 0 cisco
!
redundancy
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
 no ip address
 no ip route-cache
 shutdown
!
interface GigabitEthernet0/0
 ip address 10.137.240.127 255.255.255.0
 no ip route-cache
 duplex auto
 speed auto
 no mop enabled
!
interface GigabitEthernet0/1
 no ip address
 no ip route-cache
 shutdown
 duplex auto
 speed auto
!
interface GigabitEthernet0/2
 no ip address
 no ip route-cache
 shutdown
 duplex auto
 speed auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 10.137.240.254
!
ip sla responder
!
!
!
control-plane
!
 !
 !
 !
 !
!
!
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
!
!
dial-peer voice 10 pots
 preference 1
 destination-pattern 0.
!
dial-peer voice 20 voip
 preference 1
 incoming called-number .
!
!
!
!
gatekeeper
 shutdown
!
!
telephony-service
 sdspfarm conference mute-on 11 mute-off 11
 sdspfarm units 3
 sdspfarm unregister force
 sdspfarm tag 1 confdsp1
 no auto-reg-ephone
 max-ephones 42
 max-dn 200
 ip source-address 10.137.240.127 port 2000
 timeouts interdigit 6
 time-zone 23
 time-format 24
 date-format dd-mm-yy
 max-conferences 3 gain -6
 call-park system application
 call-forward pattern .T
 multicast moh 239.1.1.1 port 16384
 web admin system name dk password adm4cmeDK
 dn-webedit
 time-webedit
 transfer-system full-consult
 transfer-pattern .T
 secondary-dialtone 0
 fac standard
 create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
ephone-dn  12
 number 6012
!
!
ephone-dn  13
 number 6013
!
!
ephone-dn  14
 number 6014
!
!
ephone  12
 mac-address 0014.6A87.7BF3
 type 7960
 button  1:12
!
!
!
ephone  13
 mac-address 0024.C40C.9304
 type 7942
 button  1:13
!
!
!
ephone  14
 mac-address 5478.1A6B.416A
 type 6961
 button  1:14
!
!
!
!
line con 0
 login
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
 stopbits 1
line vty 0 4
 password cisco
 login local
 transport input all
!
scheduler allocate 20000 1000
!
end

 

Hi @stefan-walter,In the

Hi @stefan-walter,

In the telephony-service configuration, type the following:

telephony-service

 call-park system application

 service directed-pickup gpickup

 cnf-file location flash:

 cnf-file perphone

 no create cnf-files

 create cnf-files

Also, you can remove the feature-button from the voice register pool 1 if you want.

Let me know if that help you. It worked for me.

Rgrds,

Martin, IT Specialist

204
Views
0
Helpful
2
Replies