Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

9900 series Video IP phones

Hi all,

We are interested in purchasing the 9900 series video IP phones but I am concerned that they only work with SIP protocol.  We use SCCP in our call manager and we are running CM 5.1(2).  I see we have the option to install SIP phones but could we install one of these IP phones in our environment?  What is required to have this IP phone work for us?

Please let me know if you do.

Thank you!

Rgds,

Vicky

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: 9900 series Video IP phones

Hey Vicky,

Hope all is well my friend

Here are some answers from Kirk @ Cisco (from a great Q&A)

3) Am I correct in reading this is a SIP only phone and that SCCP is not supported?


That is correct.


5) It looks like these are just supported on Communications Manager 7.1(3) or later.  I assume they will work in SRST as well? if so what IOS version / SRST version would be required to support these phones (or does it matter?)


Initial support is on Cisco Unified Communications Manager and Business Edition System Release 7.1(3) or later. SRST 7.1 IOS 12.4 (24)T) is the minimum release that will support the IP Phone 8900 and 9900 Series.

https://www.myciscocommunity.com/message/27875;jsessionid=2803C635EB8687EE4C7E09777FA4FD5B.node0

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: 9900 series Video IP phones

Hey Vicky,

Hope all is well my friend

Here are some answers from Kirk @ Cisco (from a great Q&A)

3) Am I correct in reading this is a SIP only phone and that SCCP is not supported?


That is correct.


5) It looks like these are just supported on Communications Manager 7.1(3) or later.  I assume they will work in SRST as well? if so what IOS version / SRST version would be required to support these phones (or does it matter?)


Initial support is on Cisco Unified Communications Manager and Business Edition System Release 7.1(3) or later. SRST 7.1 IOS 12.4 (24)T) is the minimum release that will support the IP Phone 8900 and 9900 Series.

https://www.myciscocommunity.com/message/27875;jsessionid=2803C635EB8687EE4C7E09777FA4FD5B.node0

Hope this helps!

Rob

New Member

Re: 9900 series Video IP phones

As always Rob, this is exactly the info I was looking for!

Thank you so much!

Rgds,

Vicky

Hall of Fame Super Gold

Re: 9900 series Video IP phones

Hi Vicky,
Before you do make a decision, did you also look at the power requirements?  In order to use the phones, you need either 20.0w PoE power or PWR-INJ4.

280
Views
0
Helpful
3
Replies
CreatePlease login to create content