Do you know where it is documented that the PC port can't be used with wireless on the 9971 phone? I can't find it anywhere. The reason I was looking into it is that I found documentation that says you can't use VXC VPN with the wireless interface, but not that the port itself can't be used with the wireless interface.
Note Cisco VXC VPN does not support the phone's Wi-Fi interface and IPv6. All existing phone VPN constraints apply to VXC VPNs. Use of VLANs in this environment is not expected and Data VLAN is not required; all traffic from the computer port is untagged.
You can configure the WLAN settings only on the Cisco Unified IP Phone keypad. You must use the ac adapter when using the Cisco Unified IP Phone in WLAN mode. WLAN is disabled when Ethernet is connected.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...