Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AA using Tcl

Hi,

Our customer is using Cisco CallManager Express 3.4 and has following requirements,

- Auto-Attendant service using TCL

- If someone dials 66592000 then it will invoke AA scripts located in the flash.

- If someone dials 0 while listening to AA IVR, call must be transferred to 6001.

- If someone dials 8 then call must be transferred to 3001.

- If user presses 0 then call must be forwarded to operator 6002.

We have already tried to configure TCL script but unable to select desired options to reach specific extensions.

Kindly help us to troubleshoot the same.

3 REPLIES
Hall of Fame Super Gold

Re: AA using Tcl

Which type of lines do you have ?

note is not posssible to have 0 to do different things when using standard B-ACD/AA.

New Member

Re: AA using Tcl

Hi,

We need to test it out for internal calls first before implementing it for PSTN calls.

We were able to set up basic AA/ACD script but unable to transfer calls to specified extensions by entering a desired number.

Hope this clarifies.

Hall of Fame Super Gold

Re: AA using Tcl

Check what is happening with "debug voice application script" and "term mon"

144
Views
0
Helpful
3
Replies
CreatePlease to create content