Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AAR failure

I need to know if I must configure AARgroup in both DN's (remote and central site dn's) or if aar works if I configure aargroup in remote side only.

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: AAR failure

Yes, once you have more then 2 sites then you can still be fine with a single AAR group as long as the prefix between the sites is the same i.e. 91.

If you have 3 sites for example and between site A and B you dial 10 digits not 11, but between sites A and C and B and C you dial 11 digits then you have to create 2 AAR Groups:

AAR_10_Digits

prefix within group 9

prefix to AAR_11_Digits 91

AAR_11_Digits

prefix within group 91

prefix to AAR_10_Digits 91

the all DNs in site A and B will use AAR_10_Digits and DNs at site C will use group AAR_11_Digits

HTH, please rate all posts!

Chris

3 REPLIES
Hall of Fame Super Silver

Re: AAR failure

You need it on both as that is how the AAR prefix is determined. It's using a prefix specified between 2 or in your case 1 AAR Group.

HTH, please rate all posts!

Chris

New Member

Re: AAR failure

Cris, then Can I configure both phones(local and remote) with a single aargroup?

Thanks in advance.

Walter

Hall of Fame Super Silver

Re: AAR failure

Yes, once you have more then 2 sites then you can still be fine with a single AAR group as long as the prefix between the sites is the same i.e. 91.

If you have 3 sites for example and between site A and B you dial 10 digits not 11, but between sites A and C and B and C you dial 11 digits then you have to create 2 AAR Groups:

AAR_10_Digits

prefix within group 9

prefix to AAR_11_Digits 91

AAR_11_Digits

prefix within group 91

prefix to AAR_10_Digits 91

the all DNs in site A and B will use AAR_10_Digits and DNs at site C will use group AAR_11_Digits

HTH, please rate all posts!

Chris

142
Views
0
Helpful
3
Replies