Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

about cucm migration license ?

Hi all,

     

         I want to migration cucm from cucm 5.0 to new cluster  cucm 8.6 system.  adn  add new mcs server . the old mcs server no use,

   we configure the new cluster cucm 8.6 with a fresh configuration. the old config data no use. we have migration license MIG-CUCM-USR-A.

how  to  obtaining a license  file?   Thanks everyone !

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

about cucm migration license ?

How did you order the migration?

Did you receive a license PAK envelope or an electronic PAK?

You need that in order to register the licenses and associate it with the CUCM MAC address.

HTH,

Chris

4 REPLIES
Hall of Fame Super Silver

about cucm migration license ?

How did you order the migration?

Did you receive a license PAK envelope or an electronic PAK?

You need that in order to register the licenses and associate it with the CUCM MAC address.

HTH,

Chris

New Member

about cucm migration license ?

I have a old cucm 5.0 cluster systerm and  ip phone .  I want to install cucm 8.6 on new mcs server.

and  ip phone will register to cucm 8.6 system, the old cucm 5.0 system and old mcs server  no use.

I received CUCM-PAK, But about MIG-CUCM-USR-A,  what  I need to provide information ?  how to obtaining a license file?

I need to send email to license@cisco.com ?  and obtaining a license setp ?  Thanks a lot !

Hall of Fame Super Silver

about cucm migration license ?

Are you building the CUCM 8 system from scratch or are you planning on upgrading existing CUCM 5.0?

To register the PAKs you go to:

cisco.com/go/license

Chris

Hall of Fame Super Red

about cucm migration license ?

Hi there,

You will need both the Software License Version for 8.6,as well as the nodes and DLU's re-hosted to the new Publisher MAC

Let them know this is for 8.6 .

Cisco Licensing is very,very good about re-homing these licenses when required. Just send an email to;

licensing@cisco.com

Something like this;

We are upgrading our server hardware  for our CUCM 5.x cluster. and moving to 8.6 We have a License tied to MAC CCCDDDAAABBB and now require the licenses to be re-homed to our Publisher MAC AAABBBCCCDDD accordingly.

***Send them the output from the License Unit Report from CUCM ***

Here is the pertinent info;

PAK = xxxxxxxxxxx

End User Name - Bobmart.com

Legal Address

City,Country

Purchase Order Number - 111111

Sales Order Number - 2222333

Bill to ID - xxxxx

Ship to ID - xxxxxxxxx

Thanks in advance for all your help with this! Can you please email the new license to:

2005@funmart.ca

Cheers!

Rob

449
Views
0
Helpful
4
Replies
CreatePlease to create content