Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

About IP Communicator ( For Win7 and XP )

Hi Folks,

In my office environment we have IP Communicator for the external usage.

  • When the users launch the IP Communicator application they get an error "The Network Adapter Needed For Registration" and then the application automatically quit don't know what is happening.... Please let me know if any one know the answer for this.
  • For some users we have an issue with "Blank screen error" (You can not see anything in the IPC display fully blank)
  • Do we need to have an administrator access to change the TFTP server IP address ????
  • What is mean by (VPN adapter). Is there any way that 2 host can have the same VPN adapter MAC address ???

Note :- In our environment we are running "Symentec endpoint protection". Is there anything related to this ???

                                                               Your answer much appreciated !!!

Kulasekara Raja. K

1 REPLY
Blue

About IP Communicator ( For Win7 and XP )

HI

1) are you using Docking station for the PC?

2) Yes you will need admin access to change the tftp information. or you can do following

disable the UAC from control panel -> User Accounts -> User

Access Control Settings -> Disabled by pulling down the control level to

minimum/bottom.

Regards

Ronak patel

Rate helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
525
Views
0
Helpful
1
Replies
CreatePlease to create content