Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

About Secondary Dial Tone on CME

How can voice gateway provide outside dial tone to 3951 just like what cucm do?

P.S.

I have configed dial plan for 3951.

Thanks & Regards

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: About Secondary Dial Tone on CME

Hi,

This SIP phone on CME does not support secondary dialtone. Only SCCP phone does with the configuration below:

telephony-service

     secondary-dial digit-string

Hope this can help you.

Michelle Jardim

5 REPLIES
Silver

Re: About Secondary Dial Tone on CME

in the telephony service - I think there is a commend "secondary dial tone" which you add

Hall of Fame Super Gold

Re: About Secondary Dial Tone on CME

The 3951 is a SIP phone and as such, not influenced by any command under telephony-service.

This said, I don't know what can be causing the problem.

New Member

 From Cisco Unified CME

 From Cisco Unified CME Release 11.6 onwards, secondary dial tone is supported on both SIP phones and SCCP phones.

Example for Configuring Secondary Dial Tone on SIP Phones

A secondary dial tone is played on the phone when comma (',') is found in the pattern. In this example, secondary dial tone is played after the digit 50.

voice register dialplan 1
 type 7940-7960-others
 pattern 1 50,

voice register pool 1
 busy-trigger-per-button 2
 id mac 0C11.6780.52A3
 type 7841
number 1 dn 1
 dialplan 1
 dtmf-relay rtp-nte
 username cisco1 password cisco
 codec g711ulaw
 no vad
 provision-tag 1	
Cisco Employee

Re: About Secondary Dial Tone on CME

Hi,

This SIP phone on CME does not support secondary dialtone. Only SCCP phone does with the configuration below:

telephony-service

     secondary-dial digit-string

Hope this can help you.

Michelle Jardim

New Member

Re: About Secondary Dial Tone on CME

Hi,Michelle,

I have tested the secondary dial tone command under telephony service.

However,it doesn't effect SIP phone.

Thanks

1552
Views
0
Helpful
5
Replies