Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AC Message -- Help

Hi,

Have anyone seen the following message "Operator terminal is up. Please relogin if your device configuration has change"?

When it happens, sometimes I get a Question Mark on the directory lines. Closing and opening the AC brings it back to normal.

I have gathered this from the CCM traces:

ACRMISocketFactory: rmi socket exception: java.net.ConnectException: Connection refused: connect

I have no replication problems neither a firewall between the PC running the AC and the CCM server. I have uninstalled and installed AC, restarted TCD and CTI.

Any other suggestions? Thanks.

10 REPLIES
Gold

Re: AC Message -- Help

What is the exact CM version ?? Also, can u attach acclient.txt file from the client machine which the error occurs

New Member

Re: AC Message -- Help

Hi,

CCM ver 4.2(3)sr1. Take a look at the acclient file. The problem occurred at 12:48.

Thank you.

Gold

Re: AC Message -- Help

looks like the client lost connectivity with CM and therefore caused this error. Did you restart any service on CM, esp TCD or CCM ?? Or was there any connectivity issue between CM and client machine ??

New Member

Re: AC Message -- Help

Hi,

No, I didn't do anything and I am not aware of any connectivity issues. Most of the time when it happens the AC is idle (Open, but offline).

I am looking at the line state port connectivity because it seems out of the range that Cisco specifies but I am not sure why is not working now when it was working before. No changes have been made on the network.

Thanks.

Gold

Re: AC Message -- Help

Do you have a firewall between the client and server ??

New Member

Re: AC Message -- Help

Technically No and that is where I am confused. No changes has been made to that firewall, this problem started after the upgrade.

Yes, there one firewall but this traffic is not going through it.

Gold

Re: AC Message -- Help

this started after the upgrade ?? What was upgraded ?? Note that when you do a CM upgrade, the client also needs to be upgraded. To check if you have the same version on the client and server click on Help ---> About. This should give you the info if they are on the same version or not. If the versions are diff, upgrade the client machine with the version as on the server

New Member

Re: AC Message -- Help

I upgraded from 4.1(3) to 4.2(3)sr1 and yes, I upgraded the AC client.

Everything was working fine before the upgrade.

Gold

Re: AC Message -- Help

From all the errors looks like packets are either getting blocked or dropped. Could not find any bug with CM 4.2(3) regarding this issue. You might want to open a TAC case and have them troubleshoot

Gold

Re: AC Message -- Help

One more thing that you can check is Application Log on the CallManager and see if there is any TCD Related error around the time when AC fails

215
Views
0
Helpful
10
Replies