Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Accept Collect Calls E1 R2 with country Brazil use-defaults

All,

I set up a controller E1 with country brazil use-defaults. When I receive a collect call from PSTN, this call has category II-8 and the cisco voice gateway returns B-7, disconnecting the call. I find this feature "E1 R2 Collect Call Blocking".

I need accept collect calls from PSTN with category II-8 and can´t find a way to disable this feature !!!

New Features

E1 R2 Collect Call Blocking Feature

The  E1 R2 Call Blocking feature provides two ways to block incoming collect  calls-category-based and double answer. With category-based call  blocking, collect calls will be blocked based on a specific category.  For example, in Brazil, collect calls arrive with a category II-8, for  which the Cisco access router will send B-7 as a response instead of an  answer signal. This approach is only applicable when switches in the  central office support category-based blocking.
###########################################################################

Router:3825

IOS:c3825-advipservicesk9-mz.124-24.T4.bin

Controller config:

controller E1 0/0/0

framing NO-CRC4

line-termination 75-ohm

ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani

cas-custom 0

  country brazil use-defaults

  metering

  category 2

  answer-signal group-b 1

  trunk-group PSTN timeslots 1-15,17-31 preference 1 description EMBRATEL CIRCUITO (1)

############################################################################

Does anyone have any tips that can help me?

Thanks and Regards.

Guilherme Lonardoni

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Accept Collect Calls E1 R2 with country Brazil use-defaults

That is a completely undocumented command, in perfect Cisco style.

Thanks for letting us know!

5 REPLIES

Re: Accept Collect Calls E1 R2 with country Brazil use-defaults

try to disable the double answer:

Router(config)# controller e1 4/0

Router(config-controller)# cas-custom 1

Router(config-controller)# no double-answer

Regards!

Leonardo Santana

Hall of Fame Super Gold

Re: Accept Collect Calls E1 R2 with country Brazil use-defaults

Double-answer is disabled by default.

May be OP can try enabling it, to possibly prevent the router to reject the call with category-based signal.

Accept Collect Calls E1 R2 with country Brazil use-defaults

Thanks, but double-answer is not configured.

Disconnection occurs based on category.

I solved problem with command collect-call-enable under cas-custom.

Thanks all.

Hall of Fame Super Gold

Accept Collect Calls E1 R2 with country Brazil use-defaults

That is a completely undocumented command, in perfect Cisco style.

Thanks for letting us know!

New Member

Accept Collect Calls E1 R2 with country Brazil use-defaults

Hi Guilherme !

I have another situation with Collect Calls.. I need to allow the incomming collect calls, but, the calls are comming from PSTN to a Philips PBX first... than, to a cisco gateway.. it would be like this:

PSTN > PBX > E1 ISDN QSIG > C2951 > CUCM7.x > IP Phone.

When I pickup the call, I start hearing the music.. but the call is droppend in a second....

any idea ?

Thank you !

Andrei.

1964
Views
15
Helpful
5
Replies