Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACD alerting bip when some is in queue. CCME.

HI,

I have a problem that i hope some can help me with.

I have a CCME version 4.0, after the upgrade from 3.x to 4.0, i got this problem. I am using B-ACD 2.1.0.0.

Then the agents talk on a phone (7920) and some is in the queue, we get a bip evry apx. 5 sec. to inform that there is some in the queue. I will like to remove this bip, because it is anoying. It looks like it is the acd tcl script that make this bip. I can not find a parameter on this and how to disable the bip.

If i know that is is posible in newer tcl scipt it is no problem to upgrade it.

Is the some persons here that can confirm this if there is a parameter to disable this bip. ?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: ACD alerting bip when some is in queue. CCME.

Hi Soren,

You are correct here, there is a new feature added for this funtionality (it looks like you could disable this by using the no call waiting beep accept command);

IOS

12.4(9)T

12.4(4)XC

In CME 4.0 - Improved waiting call notification - When a call is waiting in a call queue, the phone users who are members of the queue's hunt group are notified by a call-waiting beep, text display, and lit message lamp.

No special configuration is required

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a80c8.html#wp2271253

The beep will be heard only if the ephone-dn is configured to accept call-waiting beeps (default).

accept - Allows an ephone-dn to receive incoming call-waiting beeps.

call-waiting beep [accept | generate]

***Can you try this command;

Example:

Router(config-ephone-dn)# no call-waiting beep accept

From this doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a8300.html#wp1032802

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: ACD alerting bip when some is in queue. CCME.

Hi Soren,

You are correct here, there is a new feature added for this funtionality (it looks like you could disable this by using the no call waiting beep accept command);

IOS

12.4(9)T

12.4(4)XC

In CME 4.0 - Improved waiting call notification - When a call is waiting in a call queue, the phone users who are members of the queue's hunt group are notified by a call-waiting beep, text display, and lit message lamp.

No special configuration is required

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a80c8.html#wp2271253

The beep will be heard only if the ephone-dn is configured to accept call-waiting beeps (default).

accept - Allows an ephone-dn to receive incoming call-waiting beeps.

call-waiting beep [accept | generate]

***Can you try this command;

Example:

Router(config-ephone-dn)# no call-waiting beep accept

From this doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a8300.html#wp1032802

Hope this helps!

Rob

New Member

Re: ACD alerting bip when some is in queue. CCME.

Thanx for the info :-)

95
Views
0
Helpful
2
Replies