Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

ad-hoc conference hardware "cannot complete conference"

Hi All,

As per Subject, I'm unable to complete an ad-hoc conference.

I do the following:

1) call party 1

2) press confr softkey

3) call party 2

4) press select for call 1, press select for call 2, press Join softkey.

======================

My DSP are registered:

CUCME#sh sdspfarm uni

mtp-1 Device:xcoder TCP socket:[9]  REGISTERED in SCCP ver 18/18

actual_stream:0 max_stream 8 IP:10.200.20.120 * 29595  MTP Dixieland keepalive 11 

Supported codec:

                 G711Ulaw

                 G711Alaw

                 G729

                 G729a

                 G729b

                 G729ab

Universal Xcoder

max-mtps:1, max-streams:0, alloc-streams:0, act-streams:0

============================

SCCP is UP

CUCME#show sccp

SCCP Admin State: UP

Gateway Local Interface: FastEthernet0/0

        IPv4 Address: 10.200.20.120

        Port Number: 2000

IP Precedence: 5

User Masked Codec list: None

Call Manager: 10.200.20.120, Port Number: 2000

                Priority: 1, Version: 7.0, Identifier: 1

Transcoding Oper State: ACTIVE - Cause Code: NONE

Active Call Manager: 10.200.20.120, Port Number: 2000

TCP Link Status: CONNECTED, Profile Identifier: 1

Reported Max Streams: 8, Reported Max OOS Streams: 0

==============================

Debug Ephone hw-Conference

CUCME#deb ephone  hw-conference

EPHONE hardware conference debugging is enabled

CUCME#

Apr  3 07:14:27.081: SkinnyHWConfAPI: reqType 14:Is Conf

Apr  3 07:14:27.081: SkinnySelectButtonPress: phone=5 dn=17 chan=2 dn_idx=306 ref=2803 line=1 ovl=1 select=1

Apr  3 07:14:29.149: SkinnyHWConfAPI: reqType 14:Is Conf

Apr  3 07:14:29.149: SkinnySelectButtonPress: phone=5 dn=17 chan=1 dn_idx=17 ref=2801 line=1 ovl=1 select=1

Apr  3 07:14:32.689: SkinnyHWConfAPI: reqType 14:Is Conf

Apr  3 07:14:32.689: SkinnyHWConfAPI: reqType 14:Is Conf

Apr  3 07:14:32.689: SkinnyJoinButtonPress: party=2 master_conf=0 participant_conf=0

Apr  3 07:14:32.689: SkinnyJoinButtonPress: line=1 ovl=1 dn=17 chan=1 selected to join conf

Apr  3 07:14:32.689: SkinnyHWConfAPI: reqType 14:Is Conf

Apr  3 07:14:32.689: SkinnyJoinButtonPress: New adhoc conf: Initial party 1(dn=17 chan=1)

Apr  3 07:14:32.689: SkinnyHWConfAPI: reqType 14:Is Conf

Apr  3 07:14:32.689: SkinnySelectButtonPress: phone=5 dn=17 chan=1 dn_idx=17 ref=2801 line=1 ovl=1 select=0

Apr  3 07:14:32.689: SkinnyJoinButtonPress: line=1 ovl=1 dn=17 chan=2 selected to join conf

Apr  3 07:14:32.689: SkinnyHWConfAPI: reqType 14:Is Conf

Apr  3 07:14:32.689: SkinnyJoinButtonPress: New adhoc conf: Initial party 2(dn=17 chan=2), ready to set up new conf

Apr  3 07:14:32.689: SkinnyHWConfAPI: reqType 1:New Conf

Apr  3 07:14:32.689: skinny_hwconf_new_adhoc_setup_video_call: Audio Ad-Hoc call

Apr  3 07:14:32.689: skinny_hwcfb_check_resource: for Audio

Apr  3 07:14:32.689:  skinny_hwcfbi_find_next_mtpcb No conference MTPCB for device type 52:Audio only Fail

Apr  3 07:14:32.689: skinny_hwconf_new_adhoc_conf_setup: No MTPCB resources for Audio Call

Apr  3 07:14:32.689: SkinnyJoinButtonPress: New adhoc conf: new conf setup failed!

Apr  3 07:14:32.689: SkinnyHWConfAPI: reqType 14:Is Conf

Apr  3 07:14:32.689: SkinnySelectButtonPress: phone=5 dn=17 chan=2 dn_idx=306 ref=2803 line=1 ovl=1 select=0

CUCME#

==================================

CUCME# sh ephone-dn conference ad-hoc

type         active inactive  numbers

=======================================

Ad-hoc          0       2      A100 

DN tags: 29

So I have the following checklist

1) SCCP is UP

2) DSPfarm is registered

3) ephone-dn for ad-hoc is configured

What am I missing that there are no resources for conferencing?

Regards

Felix

1 ACCEPTED SOLUTION

Accepted Solutions
Blue

ad-hoc conference hardware "cannot complete conference"

HI

You have confugured transcode instead of conference resource.

dspfarm profile 1 transcode universal

Configure

dspfarm profile 2 conference xyz

Regards

Ronak Patel

Please rate helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
2 REPLIES
Blue

ad-hoc conference hardware "cannot complete conference"

HI

You have confugured transcode instead of conference resource.

dspfarm profile 1 transcode universal

Configure

dspfarm profile 2 conference xyz

Regards

Ronak Patel

Please rate helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
Community Member

ad-hoc conference hardware "cannot complete conference"

thanks Ronak!

how obvious is that?!

2330
Views
0
Helpful
2
Replies
CreatePlease to create content