Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AD Multiforest integration witch CUCM 7.1.5

Hi Everybody,

I am having callmanager version 7.1.5 & AD 2003 & 2008,

I wants to do Multiforest AD integration witch CUCM 7.1.5.

So I want to know is it possible to do multiforest integration with CUCM 7.1.5.

Regrads

Deepak

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Blue

AD Multiforest integration witch CUCM 7.1.5

Hi Deepak,

For multiforest integration You will have to be on 8.0(1), or later.

Regards

Ronak patel

Rate helpful posts by clicking stars belw the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
4 REPLIES
Blue

AD Multiforest integration witch CUCM 7.1.5

Hi Deepak,

No CUCM 7.x do not support multiforest integration. You will have to be on 8.0(1), or later.

https://supportforums.cisco.com/docs/DOC-16356 ( For 8.0.1 and + release ).

Regards

Ronak Patel

Rate helpful posts by clicking stars belw the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
New Member

AD Multiforest integration witch CUCM 7.1.5

Hi Ronak

Thankx for tour reply,

But in below doc , 7.x can support ADAM and LDS

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/directry.html

So doest it means it supports Multiforest integration as ADAM and LDS are used for Multiforest integration with CUCM.

Thanx

Deepak

Blue

AD Multiforest integration witch CUCM 7.1.5

Hi Deepak,

For multiforest integration You will have to be on 8.0(1), or later.

Regards

Ronak patel

Rate helpful posts by clicking stars belw the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
New Member

AD Multiforest integration witch CUCM 7.1.5

Thanx a lot Ronak

322
Views
0
Helpful
4
Replies
CreatePlease login to create content