Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Adding 7911 to CCM 4.1.3 sr2

We just purchased 40 or so 7911 phones. I went to add code for Device Defaults and found no 7911 option. Programmed phone as 7912 and is regected. How do you add 7911 to 4.1.3?

3 REPLIES
Green

Re: Adding 7911 to CCM 4.1.3 sr2

You need to install a device package to have this device in you administration pages. You need to go to

http://www.cisco.com/cgi-bin/tablebuild.pl/callmgr-41 and download

"ciscocm.4-1-DevPack-28.2". I checked the readme for the device package

and the 7911 faq on CCO

(http://www.cisco.com/en/US/partner/products/hw/phones/ps379/products_qanda_item0900aecd8039de5e.shtml) and 4.1(3)SR1 is the minimum version required for CCM.

New Member

Re: Adding 7911 to CCM 4.1.3 sr2

I typed 7911 and CCM and many variaions under search and could not get this info to come up How did you find this info? If I may ask....

Phillip

Hall of Fame Super Red

Re: Adding 7911 to CCM 4.1.3 sr2

Hi Phillip,

Just thought I would throw this in, if you use something like "7911 release notes" you will come up with some good docs like this;

http://www.cisco.com/en/US/products/hw/phones/ps379/prod_release_note09186a00805b0439.html#wp1031083

Hope this helps in your future searches!

Rob

158
Views
5
Helpful
3
Replies