11-16-2006 06:43 AM - edited 03-14-2019 06:50 PM
We just purchased 40 or so 7911 phones. I went to add code for Device Defaults and found no 7911 option. Programmed phone as 7912 and is regected. How do you add 7911 to 4.1.3?
11-16-2006 07:06 AM
You need to install a device package to have this device in you administration pages. You need to go to
http://www.cisco.com/cgi-bin/tablebuild.pl/callmgr-41 and download
"ciscocm.4-1-DevPack-28.2". I checked the readme for the device package
and the 7911 faq on CCO
(http://www.cisco.com/en/US/partner/products/hw/phones/ps379/products_qanda_item0900aecd8039de5e.shtml) and 4.1(3)SR1 is the minimum version required for CCM.
11-16-2006 07:23 AM
I typed 7911 and CCM and many variaions under search and could not get this info to come up How did you find this info? If I may ask....
Phillip
11-17-2006 09:38 AM
Hi Phillip,
Just thought I would throw this in, if you use something like "7911 release notes" you will come up with some good docs like this;
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_release_note09186a00805b0439.html#wp1031083
Hope this helps in your future searches!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide