Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Adding a second SIP peer in sip-ua section in CME

I currently have one SIP trunking peer and in the section sip-ua the configuration looks like this:

sip-ua

no remote-party-id

retry invite 2

retry register 10

timers connect 100

sip-server ipv4:218.62.1.195:5060

I want to test a second SIP trunking provider which requires authentication. 

But I don't want to affect the existing SIP service.  Would adding the two lines

get me what I want?  That is - I want authentication being sent only when

traffic is destined for 192.168.2.2  Thank-you.

sip-ua

no remote-party-id

authentication username 9515551212 password xxxx realm 192.168.2.2

retry invite 2

retry register 10

timers connect 100

sip-server ipv4:208.70.13.195:5060

sip-server ipv4:192.168.2.2:5060

1 REPLY
Hall of Fame Super Gold

Re: Adding a second SIP peer in sip-ua section in CME

Currently, authentication to only a single remote SIP is supported.

There is no way around that (major overight by cisco).

252
Views
0
Helpful
1
Replies
CreatePlease login to create content