Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Adding a subscriber communications manager server in a cluster

Hello,

at this moment, we have only one publisher/subscriber in our IP telephony solution. Next month, we want to give it some redundancy adding a new subscriber and creating  a cluster with these two servers. I haven´t found any guideline about  adding a new subscriber, does anyone know if there is a guideline about it?

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Adding a subscriber communications manager server in a clust

Hello Daniel,

Sure. Here you can find the guide lines (I'm assuming you have a cluster version 7.X):

Install Software from a DVD on a Subsequent Node

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/install/cmins712.html#wp485604

Apply a Patch During Installation of a Subsequent Node

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/install/cmins712.html#wp485792

Add a New Node to an Existing Cluster

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/install/cmins712.html#wp485892

Hope it helps, please rate if it does.

Good luck!

Kind regards,

- Adrian.

2 REPLIES

Re: Adding a subscriber communications manager server in a clust

Hello Daniel,

Sure. Here you can find the guide lines (I'm assuming you have a cluster version 7.X):

Install Software from a DVD on a Subsequent Node

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/install/cmins712.html#wp485604

Apply a Patch During Installation of a Subsequent Node

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/install/cmins712.html#wp485792

Add a New Node to an Existing Cluster

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/7_1_2/install/cmins712.html#wp485892

Hope it helps, please rate if it does.

Good luck!

Kind regards,

- Adrian.

New Member

Re: Adding a subscriber communications manager server in a clust

Thanks for all.

467
Views
0
Helpful
2
Replies
CreatePlease to create content