Re: Adding/Delete Users on Secondary Unity server while its acti
as far as i can remember you should be able to do so, that's the whole point of having a failover server. Someone broke the failover i had at the lab so i cannot test is right now =( but you should be able to do so, SQL replication should take care of the changes and since both servers are looking at the same DC,GC, Exchange, etc all data can be accessed by both.
if you are running on the primary and you get into SAweb on the failover you will get the message that you need to do changes on the active server, but if you're running on the failover and haven't done fallback yet then you won't get that message and will be able to do the changes needed.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...