09-22-2010 10:34 AM - edited 03-16-2019 12:56 AM
Client with 7825H 3.0 servers. These servers appear to come with a RAID controller (Broadcom|CSB6 RAID/IDE Controller), but have only one drive. Anyone know if it's possible to add a drive for RAID1, and if UCM6.x/7.x can support it?
Thanks in advance,
Brian
09-22-2010 11:06 AM
If you're talking about the MCS-7825H-3.0-IPC server, it may support RAID but as far as I know this was never tested. Only the newer 7825's with removable SATA drives have been tested in that configuration.
You can give it a try and see what happens, but it wouldn't be a supported configuration.
--Matt
09-22-2010 11:07 AM
Thanks Matt. I have a few lab servers of the same vintage. I'll give it a go when time permits.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide