Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Adding drives to an MCS for RAID1

Client with 7825H 3.0 servers. These servers appear to come with a RAID controller (Broadcom|CSB6 RAID/IDE Controller), but have only one drive. Anyone know if it's possible to add a drive for RAID1, and if UCM6.x/7.x can support it?

Thanks in advance,

Brian

2 REPLIES
Cisco Employee

Re: Adding drives to an MCS for RAID1

If you're talking about the MCS-7825H-3.0-IPC server, it may support RAID but as far as I know this was never tested.  Only the newer 7825's with removable SATA drives have been tested in that configuration.

You can give it a try and see what happens, but it wouldn't be a supported configuration.

--Matt

New Member

Re: Adding drives to an MCS for RAID1

Thanks Matt. I have a few lab servers of the same vintage. I'll give it a go when time permits.

125
Views
0
Helpful
2
Replies