cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
303
Views
0
Helpful
2
Replies

Adding drives to an MCS for RAID1

Client with 7825H 3.0 servers. These servers appear to come with a RAID controller (Broadcom|CSB6 RAID/IDE Controller), but have only one drive. Anyone know if it's possible to add a drive for RAID1, and if UCM6.x/7.x can support it?

Thanks in advance,

Brian

2 Replies 2

Matthew Kaufman
Cisco Employee
Cisco Employee

If you're talking about the MCS-7825H-3.0-IPC server, it may support RAID but as far as I know this was never tested.  Only the newer 7825's with removable SATA drives have been tested in that configuration.

You can give it a try and see what happens, but it wouldn't be a supported configuration.

--Matt

Thanks Matt. I have a few lab servers of the same vintage. I'll give it a go when time permits.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: