We are using 2 CCM's with version 4.1(3)sr3b connected to 2 QSIG Gateways using 2 PRI lines.
I have had a request to configure the Callmanager in such a way that persons being called from three specific external numbers (79551, 79554 and 79552) can also see the name associated with those numbers. Those names are not being sent by the telco; is it possible to add names to those incoming numbers using the Callmanager?
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4