Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Adding prefix to Missed calls

Hi

Please Help me out here . My client wants to redial numbers coming in missed calls and received calls but calls are drooping when redialed.This is because number which shows on cisco phones is either  9XXXXXXXXX(LOCAL CELL PHONES) or 22XXXXXXXX but

Route Patterns ACTIVE as of now on CUCM:

0.[2-6]XXXXXXX  -Local PSTN

0.[7-9]XXXXXXXXX -LOCAL CELL PHONES

I reffered few forums Disscussion and links but they are very confusing . We are using H323 AND MGCP (we want it on Priority) gateway where E1s terminated.

Please Suggest at earliest ,I Hope to resolve this soon with your  help.

 

Regards

 

2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Gold

Option 1: Goto Service

Option 1: Goto Service Parameters - Select the Server - Select Services Cisco CallManager - Click on Advanced, Now search for Incoming Calling Party National Number Prefix - MGCP and add your access code (9) which you use for dialing outside.

for H323 gateway:

voice translation-rule 1
  rule 1 /^/ /90/ type national national
 voice translation-profile incmng
           translate calling 1

You can apply this translation profile to voice port (E1) or dial peer.

Suresh

Suresh

VIP Gold

No, CUCM or any device will

No, CUCM or any device will not reboot by changing this parameter. But you can reset the MGCP gateway from CUCM, sometimes its requires.

 

Suresh

6 REPLIES
VIP Gold

Option 1: Goto Service

Option 1: Goto Service Parameters - Select the Server - Select Services Cisco CallManager - Click on Advanced, Now search for Incoming Calling Party National Number Prefix - MGCP and add your access code (9) which you use for dialing outside.

for H323 gateway:

voice translation-rule 1
  rule 1 /^/ /90/ type national national
 voice translation-profile incmng
           translate calling 1

You can apply this translation profile to voice port (E1) or dial peer.

Suresh

Suresh

New Member

Looks good. Can you please

Looks good. Can you please confirm if saving these changes in service parameter will reboot the system or if it requires reboot after saving "Incoming Calling Party National Number Prefix - MGCP" changes ???

VIP Gold

No, CUCM or any device will

No, CUCM or any device will not reboot by changing this parameter. But you can reset the MGCP gateway from CUCM, sometimes its requires.

 

Suresh

VIP Purple

Hi Ashish, You can refer the

Hi Ashish,

 

You can refer the DOC for adding prefix to missed calls.

 

http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/68223-digit2.html

 

regds,

aman

New Member

Hi SureshI really appreciate

Hi Suresh

I really appreciate your offline support.Changes are done and working fine now.

Its under monitoring now as client insited to see if we come across any side effects of same changes.

Meanwhile can you suggest any method to append +91 in the current scenario ?

 

Regards

HiKindly find the urlhttps:/

Hi

Kindly find the url

https://supportforums.cisco.com/discussion/11467326/missed-call-dial-back

After you done from CUCM , go to your MGCP gateway and do the below:-

router(config)#no mgcp

router(config)#mgcp

 

Thanks

please rate all useful information

 

462
Views
0
Helpful
6
Replies
CreatePlease login to create content