Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Adding Sip Phones - "End User" Vs "Application User"

Can we use "Application User" as the  'Owner ID' & 'Digest User' when Adding a 3rd Party Sip Phone? Since our CUCM is integrated with LDAP, we cannot create new 'End User' without calling the AD Administrator.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Re: Adding Sip Phones - "End User" Vs "Application User"

You need an End User account. Just create a new OU in LDAP and place all of the phones there if they are not assigned to a real user.  Assign a long/random password to secure the account from all other logins.

Please remember to rate helpful responses and identify helpful or
4 REPLIES
VIP Super Bronze

Re: Adding Sip Phones - "End User" Vs "Application User"

You need an End User account. Just create a new OU in LDAP and place all of the phones there if they are not assigned to a real user.  Assign a long/random password to secure the account from all other logins.

Please remember to rate helpful responses and identify helpful or
New Member

Re: Adding Sip Phones - "End User" Vs "Application User"

Thanks a lot. So it can * NOT WORK * with 'Application User' ?

Super Bronze

Re: Adding Sip Phones - "End User" Vs "Application User"

Hi

As I recall, application users don't have digest credentials, so no.

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Adding Sip Phones - "End User" Vs "Application User"

Under CUCM 9.1.1 and later, you can sync to ldap/active directory and also have end users not in the ldap/active directory.

You can sync, and create the end users for the 3rd party SIP phones.

329
Views
0
Helpful
4
Replies