Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

adding softkeys to 7921with CME

How would I do this? The admin guide has unstructions for CallManager but not for CME. I am specifically interested in adding the Meetme softkey.

Thanks,

Diego

2 REPLIES
Hall of Fame Super Red

Re: adding softkeys to 7921with CME

Hi Diego,

SCCP: Configuring Conferencing Options for a Phone

To configure a template of conferencing features such as the add party mode, drop party mode, and soft keys, for multi-party ad hoc, and meet-me conferences and apply the template to a phone, perform the following steps.

--------------------------------------------------------------------------------

Note The following commands can also be configured in ephone configuration mode. Commands configured in ephone configuration mode have priority over commands in ephone-template configuration mode.

--------------------------------------------------------------------------------

Restrictions

•The ConfList (including the Remove, Update, and Exit soft keys within the ConfList function) and RmLstC soft keys do not work on a Cisco Unified IP Phone 7902, 7935, and 7936.

SUMMARY STEPS

1. enable

2. configure terminal

3. ephone-template template-tag

4. conference add-mode [creator]

5. conference drop-mode [creator | local]

6. conference admin

7. softkeys connected {[Acct] [ConfList] [Confrn] [Endcall] [Flash] [HLog] [Hold] [Join] [LiveRcd] [Park] [RmLstC] [Select] [TrnsfVM] [Trnsfer]}

8. softkeys hold {[Join] [Newcall] [Resume] [Select]}

9. softkeys idle {[Cfwdall] [ConfList] [Dnd] [Gpickup] [HLog] [Join] [Login] [Newcall] [Pickup] [Redial] [RmLstC]}

10. softkeys seized {[CallBack] [Cfwdall] [Endcall] [Gpickup] [HLog] [MeetMe] [Pickup] [Redial]}

11. exit

12. ephone phone-tag

13. ephone-template template-tag

14. end

Cisco Unified Communications Manager Express System Administrator Guide

Configuring Conferencing

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeconf.html#wp1017618

Hope this helps!

Rob

New Member

Re: adding softkeys to 7921with CME

That works for my 796x and 797x phones but it doesn't seem to affect the 7921 phones. Remember they are slighly different with a message and option softkeys which can't be changed and then numbered options below the option key.

Diego

160
Views
4
Helpful
2
Replies