Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Adding UCS C-Series on Solarwinds. Need complete Set of OID

Hi Guys,

Good day to all of you! Just want to seek your assistance on this issue. We are trying to add UCS C-series to Solarwind to monitor via SNMP. SNMP has been configured on UCS however, hardware health status is not being displayed on Solarwinds. Our network team asked me to provide complete set of UCS OID so they can add them on Solarwinds. Is this really necessarry? If yes, anyone knows where i can find them?

Thanks in advance for all your help!

1 ACCEPTED SOLUTION

Accepted Solutions

Adding UCS C-Series on Solarwinds. Need complete Set of OID

Hi,

you should probably take a look at this:

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/mib/c-series/b_UCS_Standalone_C-Series_MIBRef.html

What I would do: take snmpwalk and walk the whole tree and then pick what I want to watch.

G.

2 REPLIES

Adding UCS C-Series on Solarwinds. Need complete Set of OID

Hi,

you should probably take a look at this:

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/mib/c-series/b_UCS_Standalone_C-Series_MIBRef.html

What I would do: take snmpwalk and walk the whole tree and then pick what I want to watch.

G.

New Member

Adding UCS C-Series on Solarwinds. Need complete Set of OID

Thanks Gergely, that exactly what i did and it worked. Thanks!

368
Views
0
Helpful
2
Replies