Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Additional dial-peer help

dial-peer voice 10 voip
description **International Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern .T
voice-class codec 711
session protocol sipv2
session target ipv4:66.60.xx.xx
dtmf-relay rtp-nte
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
no vad
!
dial-peer voice 11 voip
translation-profile outgoing PSTN_Outgoing
destination-pattern 214638xxxx
voice-class codec 711
session protocol sipv2
session target ipv4:66.60.xx.xx
dtmf-relay rtp-nte
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
no vad
!
dial-peer voice 1 pots
destination-pattern 214638....
direct-inward-dial
port 1/0:0
!
dial-peer voice 2 pots
destination-pattern 214630....
direct-inward-dial
port 1/0:0
!
dial-peer voice 3 pots
destination-pattern 214638xxxx
port 2/2
!
dial-peer voice 4 pots
destination-pattern 214638xxxx
port 2/1

Current dial-peers

What I want is to have anything that comes in from port 1/0:0 go out dial peer 10/11

I want to create a new dial peer for anything that comes in from 2/1 or 2/2 to go out, lets say dial-peer 12

How would I go about that?

1 REPLY

Re: Additional dial-peer help

This is exactly what you want...

http://www.ciscosystems.ac/en/US/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml#con21

Make Calls from Specific Ports go to the Desired VoIP Peer with the Same Called Number

voice translation-rule 27     

!--- Matches anything that starts with a 7 and replaces the 7 with 27.

rule 1 /^7/ /27/
!
voice translation-rule 37    

!--- Matches anything that starts with a 7 and replaces the 7 with 37.

rule 1 /^7/ /37/
!
voice translation-profile FXS27    

!--- Invokes voice translation profile “FXS27” in order to translate the called number.

translate called 27
!
voice translation-profile FXS37    

!--- Invokes voice translation profile “FXS37” in order to translate the called number.

translate called 37
!
dial-peer voice 270 voip    

!--- Matches the called number of 27 which is
!--- translated from port 2/0.  You can use a translation
!--- profile in order to change the number back to 7 here if needed.


destination-pattern 27
session target ipv4:10.1.1.2
!
dial-peer voice 370 voip    

!--- Matches the called number of 37 which is translated
!--- from port 2/1.  You can use a translation profile in order to
!--- change the number back to 7 here if needed.


destination-pattern 37
session target ipv4:10.1.1.3
!
dial-peer voice 27 pots
translation-profile incoming FXS27    

!--- Matches calls from port 2/0, and invokes voice translation
!--- profile FXS27 in order to change numbers that start with a 7 to begin with 27.


port 2/0
!
dial-peer voice 37 pots
translation-profile incoming FXS37         

!--- Matches calls from port 2/1, and invokes voice translation
!--- profile FXS37 in order to change numbers that start with a 7 to begin with 37.


port 2/1

349
Views
0
Helpful
1
Replies
CreatePlease login to create content