I have a CUCM 6.1.5 cluster, and a phone install is impending in another country, but their language for the phones is not loaded. I have tried to find a good procedure to load the additional languages, but cannot find it. Can anyone point me to the needed information to complete this?
You can use the Software Upgrades options to perform the following types of installations and upgrades:
•Install/Upgrade—Use this option to upgrade the application software, install Cisco Unified Communications Manager Locale Installers and dial plans, and upload and install device packs, phone firmware loads, and other COP files.
•TFTP File Management—Use this option to upload various device files for use by the phones to the TFTP server. The TFTP server files that you can upload include custom phone rings, callback tones, and phone backgrounds.
Same process for any CUCM Linux appliance you might have.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.