Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Adjusting the Forward all CSS using BAT

I uploaded phones to CCM using BAT. after adding them I found that I did not add the CSS for forward All. and the users have different CSS and I need the same CSS assigned to the line to be assigned to the Forward all CSS.

one more thing I need to add voice mail profile for all users and add the features forward no answer to all phones to be forwarded to voice mail

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Adjusting the Forward all CSS using BAT

Hi Madi,

Have a look at this section within BAT that is used for this purpose (Update Lines) :)

Cisco Unified Communications Manager Bulk Administration Guide 7.0(1)

Adding and Updating Lines for Phones

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/7_0_1/t03uplns.html

Hope this helps!

Rob

1 REPLY
Hall of Fame Super Red

Re: Adjusting the Forward all CSS using BAT

Hi Madi,

Have a look at this section within BAT that is used for this purpose (Update Lines) :)

Cisco Unified Communications Manager Bulk Administration Guide 7.0(1)

Adding and Updating Lines for Phones

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/7_0_1/t03uplns.html

Hope this helps!

Rob

194
Views
0
Helpful
1
Replies
CreatePlease to create content