Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

After-hours PIN fail

Hi all!

I don't know if it's a bug or a config mistake but I can't config after-hour with pin login in CME 7.1

 

I have this config,

telephony-service

 after-hours block pattern 1 0537719.T
 after-hours block pattern 2 941
 after-hours day Sun 00:00 23:59
 after-hours day Mon 00:00 23:59
 after-hours day Tue 00:00 23:59
 after-hours day Wed 00:00 23:59
 after-hours day Thu 00:00 23:59
 after-hours day Fri 00:00 23:59
 after-hours day Sat 00:00 23:59

 

 

ephone 56

 ephone-template 15

 

 pin 1234

 

I login successfully,

sh ephone login

ephone 56       Pin enabled:TRUE        Logged-in:TRUE

 

But, when I try to call fails...

 

I observed that CME is blocking by after-hours config but I think that is not correct!!

debug voice application callsetup

 //42//Dest:/IsDestBlocked: Called number 941519397 is blocked by After-Hours Blocking.

 

Some ideas?

 

Thanks in advance!

 

 

 

2 REPLIES
Hall of Fame Super Red

Hi David, I think that

Hi David,

 

I think that pattern would be blocked due to your config;

 

after-hours block pattern 2 941

 

after-hours block pattern

To define a pattern of outgoing digits for Call Blocking from IP phones, use the after-hours block pattern command in telephony-service or ephone-template configuration mode. To delete a call-blocking pattern, use the no form of this command.

after-hours block pattern pattern-tag

no after-hours block pattern pattern-tag

Syntax Description

pattern-tag

Identifier for a call-blocking pattern. Up to 100 call-blocking patterns can be defined in separate commands.

pattern

Outgoing call digits to be matched for blocking, including specific digit patterns and general regular expressions.

7-24

(Optional) If the 7-24 keyword is specified, the pattern is always blocked, 7 days a week, 24 hours a day. If the 7-24 keyword is not specified, the pattern is blocked during the days and dates that are defined with the after-hours day and after-hours datecommands.

 

From;

 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/command/reference/cme_cr/cme_a1ht.html#wp3719778986

 

Cheers!

Rob 

New Member

Thank you Rob but the problem

Thank you Rob but the problem another.

I would like to exempt ephone from block when it is logged-in with pin.

 

Like in this link.

https://supportforums.cisco.com/document/74711/after-hours-call-blocking-cme

 

Regards.

101
Views
5
Helpful
2
Replies
CreatePlease login to create content