Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Alert mgetty[18471]: cannot get TIO: Input/output error

Hi,

after the installation of CUCM 7.1(3) RTMT starts logging the following error from the Publisher node:

At Tue Nov 24 12:27:18 CET 2009 on node x.x.x.x; the following SyslogSeverityMatchFound events generated:  SeverityMatch - Alert mgetty[18471]: cannot get TIO: Input/output error   SeverityMatch - Alert mgetty[18471]: cannot get TIO: Input/output error

Everything seems to work fine, but...

Do you have any ideas?

Thanks

Best Regards

     Roberto

3 REPLIES
New Member

Re: Alert mgetty[18471]: cannot get TIO: Input/output error

Hi Roberto,

Did you manage to fix this problem? I have a customer with 5 servers in ther cluster and only one of them is reporting this issue.

Regards,

Jon

Cisco Employee

Re: Alert mgetty[18471]: cannot get TIO: Input/output error

Hello

mgetty is a application that allows you to connect a console to a serial port and get a login prompt.

This error could be considered as cosmetic, and does not affect the operation of the CUCM.

Possible options for the error:

1. There is a device that should not be connected to the serial port
-> Disconnect that device

2.There is a serial port in the server and it is disabled in the BIOS
-> Enable the serial port in the BIOS

3. There is no serial port in the server and it is enabled in the BIOS
-> Disable the serial port in the BIOS

Thanks

Fernando

New Member

Alert mgetty[18471]: cannot get TIO: Input/output error

Hello Fernando,

How is life going ? Holliday coming up, hope so

Just checked this post on fast google search and got all the answer i needed. Thanks for the help.

Cheers,

Jose

1109
Views
5
Helpful
3
Replies