Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

All IP phones cannot register to CM8.6 after upgrade

Hi all,

After upgrade from CM8.5 to CM8.6.1

all IP Phone cannot register to CM8.6 successfully.

and i found the following err message from (7970) one of the IP Phones  log

2928: ERR 04:59:24.616980 JVM: Startup Module Loader|cip.cfg.t:? - Delete of sshUserInfo file failed

2929: ERR 04:59:24.619096 JVM: Startup Module Loader|cip.cfg.t:? - informationUrl is https://10.10.1.10:8443/ccmcip/GetTelecasterHelpText.jsp

2930: ERR 04:59:24.621347 JVM: Startup Module Loader|cip.cfg.t:? - directoriesUrl is https://10.10.1.10:8443/ccmcip/xmldirectory.jsp

2931: ERR 04:59:24.623539 JVM: Startup Module Loader|cip.cfg.t:? - messagesUrl is

2932: ERR 04:59:24.625622 JVM: Startup Module Loader|cip.cfg.t:? - servicesUrl is https://10.10.1.10:8443/ccmcip/getservicesmenu.jsp

2933: ERR 04:59:24.627737 JVM: Startup Module Loader|cip.cfg.t:? - authenticationUrl is https://10.10.1.10:8443/ccmcip/authenticate.jsp

2934: ERR 04:59:24.629793 JVM: Startup Module Loader|cip.cfg.t:? - idleUrl is

2935: ERR 04:59:24.633080 JVM: Startup Module Loader|cip.cfg.t:? - messagesUrl is null

2936: ERR 04:59:24.635258 JVM: Startup Module Loader|cip.cfg.t:? - After set servicesUrl device.settings.config.servicesurl value https://10.10.1.10:8443/ccmcip/getservicesmenu.jsp

2937: ERR 04:59:24.637433 JVM: Startup Module Loader|cip.cfg.t:? - After set info url device.settings.config.informationurl value https://10.10.1.10:8443/ccmcip/GetTelecasterHelpText.jsp

2938: ERR 04:59:24.639551 JVM: Startup Module Loader|cip.cfg.t:? - After set  dir Url device.settings.config.directoriesurl value https://10.10.1.10:8443/ccmcip/xmldirectory.jsp

2939: ERR 04:59:24.641770 JVM: Startup Module Loader|cip.cfg.t:? -  idle Url of null

2940: ERR 04:59:24.643884 JVM: Startup Module Loader|cip.cfg.t:? - After set  sec auth Url device.settings.config.authenticationurl value https://10.10.1.10:8443/ccmcip/authenticate.jsp

2941: ERR 04:59:24.646022 JVM: Startup Module Loader|VendorConfig:? - vendorconfig : setConfigProperties

2942: ERR 04:59:24.648051 JVM: Startup Module Loader|VendorConfig:? -

About to set WebAccess

anybody can help?

Thanks

Sam

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: All IP phones cannot register to CM8.6 after upgrade

That easy to find out, just go to the licensing report from CCMAdmin and see the status of your licenses, but most likely you're right. It will have to do with either node licenses or SW feature license.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
3 REPLIES
Cisco Employee

All IP phones cannot register to CM8.6 after upgrade

Are the CCM services running??

Those logs have no info of why this is happening.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: All IP phones cannot register to CM8.6 after upgrade

thanks for the reply, you're right,the callmanager service isn't started. And even I started it manually. I think the reason could be the feature license issue after upgrade.

Thanks for the quick respond

Sam

Sent from Cisco Technical Support iPhone App

Cisco Employee

Re: All IP phones cannot register to CM8.6 after upgrade

That easy to find out, just go to the licensing report from CCMAdmin and see the status of your licenses, but most likely you're right. It will have to do with either node licenses or SW feature license.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
453
Views
5
Helpful
3
Replies
CreatePlease to create content