Hi Can any one tell me if we can have CME to use only Numeric user ids for Extension mobility.
Sine in our Org. the users uses their employee id (numeric) as their login id, it is difficult to key in the user id since CME by default supports Alpha numberic enrties.
For example a user with user id 6504161 need to login, he need to press the button 6 on his IP phone four times to key in digit 6, where as in CCM we can block the use of Alpha numeric user id from the service parameters. Similarly is there a way in CME to use only numeric user ids ???
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...