Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

An implementation on cucm6.1

cucm6.1 how to implement like this:

1) Remote end(an old fashion intercom), dials in, 3 phones should auto answer the call, the intercom is able to speak to these phones.

2) After the intercom claims which phone he needs to talk to, that phone should continue the conversation, however, all other phones should quit immediately.

I believe paging on Ipsession can do For step 1), however, no idea for sequential setup. Any information is appreciated.

Thanks

Jonathan

2 REPLIES
Silver

Re: An implementation on cucm6.1

The Intercom feature is only from one ip phone to another. The Intercom feature allows a user to place a call to a predefined target (phone). The called destination auto-answers the call in speakerphone mode with mute activated. This sets up a one-way voice path between the initiator and the destination, so the initiator can deliver a short message, regardless of whether the called party is busy or idle.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_0_1/cucm-rel_note-601a.html

New Member

Re: An implementation on cucm6.1

Did you get this going? I need to do the same thing.

Thanks

Andrew

115
Views
0
Helpful
2
Replies
CreatePlease to create content