04-26-2008 10:58 PM - edited 03-15-2019 10:19 AM
cucm6.1 how to implement like this:
1) Remote end(an old fashion intercom), dials in, 3 phones should auto answer the call, the intercom is able to speak to these phones.
2) After the intercom claims which phone he needs to talk to, that phone should continue the conversation, however, all other phones should quit immediately.
I believe paging on Ipsession can do For step 1), however, no idea for sequential setup. Any information is appreciated.
Thanks
Jonathan
05-05-2008 09:02 AM
The Intercom feature is only from one ip phone to another. The Intercom feature allows a user to place a call to a predefined target (phone). The called destination auto-answers the call in speakerphone mode with mute activated. This sets up a one-way voice path between the initiator and the destination, so the initiator can deliver a short message, regardless of whether the called party is busy or idle.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_0_1/cucm-rel_note-601a.html
09-27-2008 12:21 AM
Did you get this going? I need to do the same thing.
Thanks
Andrew
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: