Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Analogue conversion

Hi all,

we currently have around a 20-80 split of IP phones and analogue phones. We are looking to go 100% IPT, we have the Cisco resources in place but lack the conversion between the two systems.

The link between the two is currently dependant on 2 very old Westell boxes converting the signals.

Can anyone point me in the direction of a more resilient system that wont let us down and allows for a large number of calls processed at the same time?

Thanks,

Jamie

1 REPLY
Super Bronze

Re: Analogue conversion

Hi Jamie

You'll need to supply more info - typically in the UK we've used Westell iQ boxes as a cheap and reliable method of bridging between DPNSS (as common in the UK on older PBXs) and QSIG as supported by CCM. This may or may not be what you need depending on what connections you have available on your legacy kit.

Unfortunately Westell aren't around (at the moment).

Checkmate (http://www.checkmate.co.uk/) have a solution but it's expensive compared to the Westell boxes.

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
91
Views
0
Helpful
1
Replies
CreatePlease login to create content