Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

another approach for Connection plar command

I configured  connection plar 1001 command under the FXO port which makes all incoming calls from the PSTN on this port to go directly to 1001 (Ip Phone) .

But the customer needs that all the incoming calls on this port to go directly to two different IP Phones( 1001 and 1002) at the same time .

How can i do that  ?

  • IP Telephony
8 REPLIES
Super Bronze

another approach for Connection plar command

Hi

Create a shared DN accross the two phones and send the PLAR calls to that new DN.

Or create a hunt group including 1001 and 1002, and send the PLAR calls to the hunt pilot.

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

another approach for Connection plar command

The customer refused the shared line he'd like to send the PLAR calls to two different ephone-dn

If i used the hunt group it will prevent the 1001 and 1002 to ring at the same time

Hall of Fame Super Gold

another approach for Connection plar command

"refused shared line" ?!?

That is the best way to have multiple phones ring at once, and do things like put on hold and pick it up on the other phone.

New Member

another approach for Connection plar command

That's right but he has some SIP and others are SCCP and the mixed shared lines don't work (needs upgrade the CME to ver 9.0 )

Hall of Fame Super Gold

another approach for Connection plar command

If interested in alternatives, I also wrote a script for blast calling. It can be acquired at www.ciscoscripts.com

New Member

another approach for Connection plar command

Hi Paolo,

The link doesn't work

Hall of Fame Super Silver

another approach for Connection plar command

New Member

another approach for Connection plar command

Thanks chris for the useful link I found the following config

voice hunt-group 4 parallel

pilot 1000

list 1001, 1002, 1003, 1004

final 2000

timeout 20

but i have a question what about if the IP Phones are mixed (SIP and SCCP) ?

Does it work too ?

552
Views
0
Helpful
8
Replies