I have 2811 series router with FXO ports. We use 7940 and 7960 phones. Gateway is setup in Call Manager as H323. When calls come in, it takes 3 PSTN rings before the router answers the call (as seen by ccapi debugs). The only config I have on the voice-ports is "connection plar opx", otherwise default settings are used. Can anyone tell me how to get the router to answer the call more quickly? Thank you!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...